With advancements in technology, modern LG washing machines have become incredibly user-friendly. Equipped with built-in computer control panels, these machines offer helpful diagnostic capabilities to identify various issues. However, understanding the indicated error codes and knowing how to resolve them is crucial. Luckily, iCare Appliance Repair, a trusted LG appliance repair service provider authorized by the manufacturer, has extensive experience in servicing front and top-load LG washing machines in Toronto the GTA. Our skilled team of over 20 fully licensed and insured experts is proficient in deciphering error codes. Allow us to assist you in diagnosing and resolving the most common LG washer error codes, ensuring high-quality repairs using premium parts.
LG error code
UE Error Code
Issue:
The UE error code indicates an unbalanced load in the washing machine drum, causing it to vibrate excessively.
Potential problem areas:
Unbalanced load, loose or worn suspension springs.
How to resolve:
To resolve the UE error code, redistribute the load evenly in the drum and ensure that the machine is on a level surface. If the error code persists, it may indicate an issue with the suspension springs, and it is advisable to contact a professional for further assistance.
FE Error Code
Issue:
The FE error code indicates a problem with the water inlet valve, resulting in an overfilling of the washing machine.
Potential problem areas:
Faulty water inlet valve, water pressure issue.
How to resolve the issue:
FE error code may be resolved by turning off the water supply to the machine and unplugging it. While the machine is unplugged and check for any clogs or kinks in the water supply hose.
PE Error Code
Issue:
The PE error code suggests that the water level sensor is not reading accurately.
Potential problem areas:
Water level sensor.
How to resolve the issue:
To resolve the PE error code, unplug the machine for 10 seconds and then run another washing cycle. If the error code continues to appear, it is recommended to contact an appliance repair service for professional assistance.
OE Error Code
Issue:
The OE error code indicates a problem with the draining of water from the washing machine.
Potential problem areas:
Clogged drain hose, faulty drain pump, improper installation of drain hose.
How to resolve the issue:
In order to resolve an OE error code you need to check for any clogs or kinks in the drain hose and ensure it is properly installed. Clean the drain filter and check the drain pump.
DE Error Code
Issue:
The DE error code suggests a problem with the door lock assembly.
Potential problem areas:
Faulty door lock assembly, wiring issue.
How to resolve the issue:
In order to resolve a DE error code you will need to make sure the door is fully closed with no obstructions.
LE Error Code
Issue:
The LE error code on an LG washer indicates a problem with the motor, usually caused by excessive stress or a malfunction. Potential problem areas: Washing machine motor.
How to resolve the issue:
To resolve this error code, start by reducing the load size and pressing the reset button on the machine. If the error code persists, it is advisable to contact a professional appliance repair service for on-site assistance.
tCL Error Code
Issue:
The tCL error code suggests the need to run a clean tub cycle to remove detergent and residue buildup in the washing machine tub, which can affect clothing quality. Potential problem areas: Washing machine tub.
How to resolve the issue:
To resolve the tCL error code, ensure that the washing machine tub is empty, fill the detergent dispenser with bleach, and select the clean cycle option. If the error code continues to appear even after running the clean cycle, it is recommended to contact an appliance repair service for further assistance.
dE Error Codes
Issue:
The dE error codes (dE, dE1, dE2) indicate that the washing machine door failed to lock properly. Potential problem areas: Door locking mechanism.
How to resolve the issue:
To resolve the dE error codes, turn off the machine, unplug it for a few seconds, and then press and hold the Start/Pause button for 5 seconds. After turning the machine back on, the circuit breaker will reset, allowing you to close and lock the door.
CE Error Code
Issue:
The CE error code signifies a short circuit in the washing machine. Potential problem areas: Wiring, broken motor, or power control board.
How to resolve the issue:
To resolve the CE error code, power off the machine, unplug it for 10 seconds, and plug it back in. Attempt to run a washing cycle again. If the error code persists, it is recommended to seek professional assistance from an appliance repair service.
Sud Error Code
Issue:
The Sud error code indicates excessive suds in the washing machine, triggering a suds-reducing cycle that can take up to 2 hours. Potential problem areas: Water hose or water line.
How to resolve the issue:
To resolve the Sud error code, check for any clogs or blockages in the water hose or water line that could be causing a backup. Clear any clogs and rerun the cycle. If the problem persists, try reducing the amount of detergent used in each load.
Cd Error Code
Issue:
The Cd error code is not a genuine error but indicates the cool-down period after completing the drying cycle. Potential problem areas: Electronic control panel malfunction.
How to resolve the issue:
If your machine is functioning correctly, no action is required as the code should clear once the cycle is complete. However, if the Cd error code persists or affects the operation of the machine, it may indicate an electronic failure, and it is recommended to contact a professional appliance repair service for further assistance.
PE Error Code
Issue:
The PE error code suggests that the water level sensor is not reading accurately. Potential problem areas: Water level sensor.
How to resolve the issue:
To resolve the PE error code, unplug the machine for 10 seconds and then run another washing cycle. If the error code continues to appear, it is recommended to contact an appliance repair service for professional assistance.
PF Error Code
Issue:
The PF error code indicates a power failure during the washing cycle, resulting in a disruption of the power supply to the machine. Potential problem areas: Washing machine cord, external power supply.
How to resolve the issue:
The PF error code should clear on its own once power is fully restored. To address this issue, check for a tripped breaker, ensure the washing machine cord is correctly plugged in, and verify the stability of the external power supply. If these measures do not resolve the problem, it is advisable to contact an appliance repair service for assistance.
Also Read: How to Fix a Washing Machine That Won’t Spin
Same Day LG Washer Repair Services
For professional LG washer troubleshooting and repair services in the Toronto and the GTA areas, rely on iCare Appliance Repair. With over 10 years of industry expertise, our team of technicians is well-equipped to handle all LG washing machine error codes and their resolutions.
Instead of attempting to troubleshoot LG washing machine error codes on your own, trust the reliability and experience of our services. Here’s why you should choose iCare Appliance Repair:
- Over 17 years of experience servicing LG washing machines
- Same-day service available
- Licensed, insured, and covered by public liability insurance
- Comprehensive warranty covering all parts and services
Contact us today at (647) 370-2828 for a free quote. Our iCare Appliance Repair service representatives are available seven days a week for your washing machine repair, offering prompt and reliable assistance for all your LG appliance repair needs, including LG washing machines, refrigerators, and more.
*None of the information above guarantees the right solution for the faulty code and we don’t take any responsibility for anything that happens, if you are not sure about the correct action, please contact us at (647) 370-2828*
